What should I do if the luminous powder is blackened?

Luminous powder is commonly used for injection molding, PP, PC., PE, ABS and other transparent resins or transparent plastic materials, etc., but often this blackening problem, this use problem is inevitable, but can Reduce his occurrence.

1. The luminous powder mixing process can not be used for high-speed metal stirring. When the luminous powder is in contact with metal for a long time, the chemical reaction will be blackened and stirred with a non-metallic lining container. This can reduce the wear of the luminous powder as much as possible. Use manual ingredients.

2. Add diffusion oil during the process of feeding, which can reduce the friction between the luminous powder and the screw.

3. The time of discharge is as short as possible.

4. Check the smoothness of the screw before production to ensure the smoothness of the screw.

5. Xingsheng Luminous Powder has the characteristics of fine grain size, high brightness, good dispersibility and small addition amount. The luminous time is more than 10 times longer than ordinary luminous powder, and the weather resistance is good. It can be used indoors and outdoors.

Looking for luminous powder, the first choice of prosperous effect pigments, more professional service, more assured quality.