What is the amount of luminous powder added in injection molding and ink?

How to use long-lasting luminous powder products:

1. Injection molding: firstly weigh the storage powder according to the ratio, add appropriate amount of paraffin oil (diffuse oil can be), adjust into a paste, and then pour into the well-known rubber and stir well to produce. The materials that can be injected are: PP, PE, PVC, PU, PS, ABS, TPR, EVA, PMMA, nylon, etc. The more transparent the plastic material, the better the luminous effect. If the toner is added as much as possible, the less the better, the better. 2. Adjust the ink: It is called luminescent material, transparent varnish, and related additives. Oil, what additives are different).

1. Injection molding: 4-10% luminous powder is recommended, usually 5-6% luminous powder, adjusted according to customer requirements. More than 8% of the coarse powder has a good brightness, and the low concentration ratio uses a fine powder to have a good brightness.

2. Adjusting ink: 40-60% luminous powder is recommended, 50% luminous powder is commonly used.