江苏Luminous powder

Type:江苏Luminous powder
Times:
Date:2019/05/31
Inquiry

Detailed

Place of origin	Shenzhen	Whether to import	no	kind	Color luminous powder
Field of application	ceramics	Effective	Long-lasting	Model / Specification	5kg/bag
Brand	Prosperous	colour	Yellow green	Scope of use	Decorative paints for plastics
special service	Free sample	product name	Luminous powder	Whether dangerous chemicals	no
use	For coatings, plastics, ceramics

In the injection molding, the long-lasting luminous powder is mainly caused by the hardening of the luminous powder and the blackening of the screw. How to avoid this phenomenon?

1. First of all, the choice of luminous powder should be as fine as possible, the soft powder of luminous powder.

2. Secondly, the selection of the machine should be as old as possible, and the shorter screw injection molding machine (generally recommended to be within 0.8 meters) to produce luminous products will be better.

3. Try to mix the mixture as much as possible to avoid mixing the machine.

4. In addition, the temperature and pressure should be reduced as much as possible during the injection molding process, and the temperature and pressure should be lowered as much as possible on the basis of the finished product.

5. The proportion of luminous powder used for post-injection molding is generally 3%-10%. The ratio can be adjusted according to the requirements of luminous brightness and cost accounting, but the better addition ratio should not exceed 10%.

The luminous powder produced by our company has softer powder, faster light absorption, finer particle size and high brightness. It is good for the blackening phenomenon of luminous powder in the injection molding process from the luminous powder.

Leather luminous powder