Commonly used construction methods for glitter powder

The commonly used spraying methods of glitter powder are usually powdered by artificial dusting or special spray gun. The powder on the spray gun is divided into wet spray and dry spray. These methods can be used to make the glitter powder to the required parts.

Let me talk about the golden glitter powder. This method is mainly used for small areas. Generally, the glitter powder is placed in a small bottle, similar to the kind of pepper powder. After the equipment is installed, the glued parts are glued. Or varnish layer, and then sprinkle the glitter powder, this method is more applied to the Christmas craft or part of the craft jewelry, the disadvantage is that it needs to be done manually, and the surface treatment is not enough to evenly drop the powder, need to add excess glitter powder Remove it.

    The method of powder on the spray gun is mostly used in industries where the process is required, such as plastic products or decorative materials, painting and other industries, and the relative use cost will be slightly higher. Here's how to use these two methods:

1. Wet spray is to mix the glitter powder into the varnish and spray it directly on the parts. The effect of wet spray is not too uniform, and once the varnish is sag, the glitter powder will flow along with it, causing a local large The impact of the overall appearance is not very beautiful, the most important thing is that it is difficult to level, need to be repeatedly polished and sprayed, can be smoothed, for silver glitter powder is better, the color of glitter powder can not be done.

2. Dry spray is a relatively common method. First, it is sprayed evenly, and the laminate is thin and easy to level. The silver glitter powder only needs one varnish (recommended with non-blending candy paint), which can be smoothed and colored. The onion powder should be twice, then it can be colored, painted, etc. The construction method: first select the glittering pink to be sprayed, the silver color should be silver, and the color of the glitter powder can be black or The same color as the glitter powder, it is recommended to do the same color base, so the glitter powder looks better overall! Then spray a layer of varnish, spray the glitter powder on the parts with a dry spray gun, and then varnish the surface with a dry varnish. Generally, use high-concentration varnish or flat varnish for better filling, reduce the number of spray layers! This method has good effect, uniform powder, and reduced labor. Relatively speaking, it saves varnish cost, but the glitter powder needs to be wasted. The special glitter powder used by our company can resist solvent, does not cause color loss, whitening, and penny. A piece of goods, so the selection of materials should be cautious, don't work hard on labor and materials, and the money is not earned.

Find the best effect pigments for the glitter powder, the most professional service, the most assured quality.