How to use laser powder?

Bright powder and sequins are also known as laser powder. The illusion glitter and sequins can be directly scattered on the undercoat of the nail polish, or it can be applied to the nail with a transparent nail polish. Very beautiful commonly used nail ornaments!

Here are a few basic usages:

One type is clamped with tweezers, and the bottom of the laser piece is coated with a piece of adhesive (or the adhesive is placed on the side of the nail), and then the laser powder is placed in the desired position, and then the adhesive is solidified and then coated. The upper layer protects the varnish. It is also possible to put a laser sheet directly when the nail polish is not dry, and the nail polish can also play a fixed role after solidification.

2 kinds of hands that will be finished, apply a layer of bright oil on the nails, or paint the nails with good nails and apply the nail polish to the nail polish. Use cotton swabs (you can use cotton swabs directly, or you can wrap cotton with wooden sticks yourself). This can adjust the thickness as needed. Apply a little bright powder to the place where you need it; then, after drying, apply varnish on it to avoid the decolorization of the nail polish and increase the firmness of the glitter. After the layer is dry, apply a layer. To reinforce; to apply a few more layers, so that you can persist for a long time.

Use laser powder to make a gradient

Prepare the information: a piece of paper, varnish (black nail polish) laser powder. Or first brush the oil (nail polish) and then put the nail directly into the laser powder (or use a cotton swab, toothpick) to apply a proper amount of bright powder sequins, apply it on the smile line of the nail, the idea can not be painted too much! Also don't pile up the laser powder in one position. When you brush it to the back edge of the nail, slowly increase it. Then use a bright oil brush to circle the knot. After this step, the brush with the laser powder is wiped off the paper, so that the bright glitter is cleaned, and finally a layer of bright oil is applied with the brush. No more layers can be applied, and you are done.

Look for the best effect of laser powder, the most professional service, the most assured quality.