Precautions for the use of elastic paint

1. Dry the oven at room temperature for 2 h, dry for 24 h, and recoat for at least 4 h.

2. Generally, the amount of water added should not exceed 5%. After mixing, stir well.

3. If the base material of the building has been cracked and the crack is large, it is necessary to make up the leveling with elastic putty before applying the elastic paint before it can be applied.

4. Since the elasticity of the elastic coating is based on a certain thickness of the paint film, the construction of the elastic paint should be noted that the thickness of the elastic paint is much thicker than that of the ordinary paint. The specific construction thickness can be based on the customer's elasticity. Depending on the requirements, the thicker the film, the stronger the elasticity, and the elastic coating cannot be combined with other non-elastic coatings.

5. When constructing elastic coating, the substrate must be cleaned, and there must be no dust or oil. The substrate of too light is best applied after being roughened. If it is not handled properly, the elastic film can be easily peeled off. .