How to choose a good elastic coating

Date:2018-11-26 Author:兴盛 Click:

Elastomeric coatings are also a kind of wall coating. Its main function is to protect the wall and the decorative effect, as well as waterproof and cover the gap. Therefore, it is necessary to choose a quality putty elastic putty, then how to buy elastic paint?

Elective coating tips:

1. After opening the cover, the truly environmentally-friendly elastic paint should be water-based, non-toxic and tasteless, with a pungent odor or industrial flavor, which is not an ideal choice.

2. After being placed for a period of time, the surface of the high-quality elastic coating will form a thick and elastic oxide film, which is not easy to crack. How to save money? On the home improvement network, free design budget quotes. The elastic coating defective product will only form a very thin film, which is brittle and has a spicy odor.

3. Mix the elastic paint with a wooden stick, then pick it up with a wooden stick. When the high-quality elastic paint flows down, it will form a fan shape.

4, touch with your fingers, genuine elastic paint should feel smooth and delicate.

5, brush to the wall, dry and wipe with a damp cloth, the authentic color is as bright as new, the defective product will fade.

6, look at the ingredients when buying, the composition of high-quality elastic coatings should be copolymer resin or pure acrylic resin. Of course, you can't forget to look at the shelf life of the product.

Note on the use of elastic coatings:

The use of elastic coatings should be noted that the color is uneven and the secondary repair is obvious. The reason is that the consistency is not accurate when mixing, the mixing is uneven; the thickness of the coating is inconsistent; The coating is hollow and cracked. The reason is that the base plastering is not classified according to the requirements, the mortar area is too large, and the shrinkage is different; the plastering layer is too thick, and the plastering is not layered during construction; the moisture content of the base layer is too high. The control measures shall be classified according to requirements; the base layer shall be layered with plaster; the moisture content of the base layer shall be tested and the construction shall be carried out in accordance with the requirements.