Usage and technology of glitter powder in diatom mud

Diatom mud glitter powder is widely used as a new indoor paint. Many home TV background walls and bedroom walls have chosen diatom mud. Compared with wallpaper and paint, diatom mud glitter powder has various advantages, it is not only natural decoration materials, environmental protection, but also can adjust indoor humidity, fire retardant, heat insulation and noise reduction, release negative oxygen ions. 2. Diatoms Mud onion powder should be added with water when blending, the ratio is 1:1.2. According to daily experience, the amount of water added is less than 0.5, indicating that the content of diatomaceous earth is extremely small. Therefore, when buying diatom mud, pay attention to the proportion of water added. 3. Diatom mud Glitter powder is a flame retardant material, can withstand high temperatures of 1000 ° C, and does not emit smoke during the process of fire, no odor. Good environmental performance. IV. Jingcheng Glitter Powder Diatom Mud Construction Environment Precautions When spraying various coatings, it should be applied strictly according to the temperature in the product description. Under normal circumstances, the ambient temperature of the coating application should not be lower than 5 °C. Among them, the commonly used mixed color coating application should have an ambient temperature of above 0 ° C and an ambient temperature of not less than 8 ° C when the varnish is applied. Due to the strong adsorption function of diatom mud glitter powder, please do not work under the condition that the surrounding environment is too humid or cold (temperature is lower than 5 °C, relative temperature is more than 85%), otherwise it may not achieve the expected construction effect. . At the same time, the drying time of the temperature at 23 ° C is usually 24 hours, and when the temperature is low (not lower than 5 ° C), the drying time should be appropriately extended to obtain the most desirable expected result. V. Preparation of base before the construction of ginseng powder diatom mud The effect of autumn and winter drying on the diatom mud wall surface is far lower than traditional wall materials such as latex paint and wallpaper, because the water content of diatom mud itself is relatively large. Therefore, the requirements for the wall surface itself are not too high when the smear is applied, and some small differences will not have much influence on the diatom mud construction. New painted wall surface: remove dust and impurities on the surface of the wall. If there are holes, it must be treated in time to ensure that the wall surface is clean, dry and flat. Repainting the wall surface: remove the paint film on the old wall and the floating layer of the drum, remove the surface powder and impurities, if there is crack, it must be cracked, then flatten the wall with putty twice, dry and smooth, clean stand-by.